Maxi-Floc Plus is a fast-acting flocculant that restores water clarity, even in the cloudiest swimming pools. It is one of the fastest-acting flocculants on the market, clearing pools in less than 6 hours by removing dead algae spores and other suspended particles.
It leaves no dirty residue, is suitable for all types of swimming pools, and is compatible with all pool chemicals.
General Instructions
- Calculate the required dosage of Maxi-Floc Plus using the dosage table below.
- Pre-dilute the product in a clean plastic container.
- Set the pool filter to RE-CIRCULATE mode. If this setting is unavailable, remove the cartridge filter.
- Adjust the pH to 7.8–8.0 for optimal results.
- Distribute the solution evenly around the pool while the pump and filter are running.
- Run the pump for 1–2 hours, then switch it off.
- Leave the pool undisturbed until all particles have settled to the bottom (within 6 hours).
- Vacuum the settled residue from the pool.
- Replace any cartridge filters, where necessary.
- Resume normal filtration and ensure that the pool water is properly balanced.
